Sun StorEdge T3 9-Bay Shelf w/ 9 x 9GB 10K FC HDs

Description

This is a fairly used Sun StorEdge T3- 9 BayShelf  with 9 x 9GB Drive
The Sun StorEdge T3+ array controller card contains the RAID controller hardware and firmware, including:
- One Fibre Channel-Arbitrated Loop (FC-AL) port that uses an LC small-form  factor (SFF) connector.
The fiber-optic cable that provides data channel connectivity to the array has an LC-SFF connector that
attaches directly to the port on the controller card. The other end of the fiber-optic cable has a standard
connector (SC) that attaches a host bust adapter (HBA), hub, or switch.
- One 10/100BASE-T Ethernet host interface port (RJ-45). This port provides the  interface between the
controller card and the management host system. A shielded Ethernet cable (category 5) connects the
controller to the site’s network  hub. This interface enables the administration and management of the
array via  the command-line interface (CLI).
- One RJ-45 serial port. This serial port is reserved for diagnostic procedures that can only be performed by
qualified service personnel.
- Lots of docs can be found from the link below
http://docs.oracle.com/cd/E19699-01/